ASA ntụ ntụ ADX-856
Njirimara ngwaahịa
1. Ngwaahịa ahụ nwere ngwa ngwa plasticization, ezigbo mmiri na-arụ ọrụ nke ọma.
2. Na AS resin AS ihe ndabere, ngwaahịa ahụ nwere modul (tensile / na-ehulata) modul na ike (tensile / bending), na nguzogide mmetụta dị mma.
3. Elu gloss na ezigbo ihu igwe na-eguzogide.
4. Ngwaahịa dị mma maka resins AS dị iche iche.Enwere ike iji ya na ihe nkiri AS calendering, AS extrusion, ịkpụzi injection na ubi ndị ọzọ.
Ngwongwo anụ ahụ
| Ngwongwo | Index | Nkeji |
| Nyocha ntupu 20 | 99 | % |
| Oke | 0.3-0.5 | g/cm3 |
| Ihe na-agbanwe agbanwe | .1.5 | % |
* Ndekọ ndeksi na-anọchi anya nsonaazụ a na-ahụkarị nke anaghị ewere dị ka nkọwapụta.
Ọmụmaatụ nke iji usoro
| Aha | (Ningbo Taihua 2200) AS resin | (Qimei 138H) AS resin | ADX-856 |
| Usoro onunu ogwu/g | 20 | 50 | 30 |
Arụmọrụ igwe
| Ihe | NwaleeỤzọ | NnwaleỌnọdụ | Nkeji | Nkọwa nka nka (ADX-856) | Nkọwa nka nka (Ihe atụ nke iche) |
| Mmetụta Mmetụta | GB/T 1043 | 23 ℃ | KJ/m2 | 16.7 | 11.5 |
| Ike ọdụdọ | GB/T 1040 | 10mm/min | MPa | 32.70 | 38.38 |
| Pasent Mgbatị Nkwụsị Ụkwụ | GB/T 1040 | 10mm/min | % | 66.59 | 15.01 |
| Na-ehulata Ike | GB/T 9341 | 1.0mm/min | MPa | 68.28 | 66.04 |
| Modul na-agbanwe agbanwe | GB/T 9341 | 1.0mm/min | MPa | 2283.30 | 2043.60 |